R. Jagadeesh

R. Jagadeesh

Research interest/Consulting area
TQM, Six Sigma, Quantitative Techniques, Operations Management, Logistics and Supply Chain Management, Technology Management and Innovation

Courses offered
Quantitative Techniques, Operations Management, TQM, Technology Management

Positions held/Associated with
Director, Bhavan - SIET Institute for Management, Bangalore

Also teaches/taught at
Richard J Fox School of Business & Management, Temple University, USA
Sri Jayachamarajendra College of Engineering (SJCE), Mysore
Kirloskar Institute of Advanced Management Studies (KIAMS), Harihar

Dr. R. JagadeeshBE, ME, Ph. D
Professor - Operations 
jagadeeshraj@sdmimd.ac.in

His qualifications include B.E. (Mysore University), M.E. (Madras University), Diploma in Production Management (Annamalai University), Six Sigma Green Belt, and Ph.D. (I I T, Bombay). He has also certifications in PMP Preparation and CMM. He has worked as full time faculty at Sri Jayachamarajendra College of Engineering (SJCE), Mysore and also served as Director of Bhavan SIET Institute of Management, Bangalore. Since 2006, he has been associated as Adjunct Faculty at Richard J. Fox School of Business and Management, Temple University, Philadelphia, USA, where, he teaches a course on Operations Management.

He has co-authored the Indian adaptation of the book Operations Management by Jay Heizer and Barry Render, published by Pearson Education. He has published more than 90 research papers in reputed national and international journals and conferences. He is the Advisor (India Operations) Emerald, UK, which publishes a large number of international publications. He is Member of Editorial Advisory Board for The TQM Journal, Peer reviewer for International Journal of Education and Training, Quality Assurance in Education and Journal of Management Development. He is listed by Marquis Who's Who 2010 US Edition. He also holds PG Diploma in Production Management and Certification in Six Sigma Green Belt. He was the Chief Editor of the SDMIMD Journal of Management. He has guided doctoral candidates in the area of TQM, ISO 9000, Six sigma and Knowledge based Entrepreneurship under  University of Mysore, Visveswaraya Technological University, and University of Azteca, Mexico. He has won the National award honored by Indian Society for Technical Education as Best M.Tech Thesis Project Guide. His contribution to his research area has won the special appreciation certificate from Indian Institute of Materials Management.

He has conducted several training program and consultancy projects in the area of quality management, supply chain management and research activities. He is the member of many engineering, quality and academic associations and bodies.

Publications

Editor
 
  1. Jagadeesh, R., Srilakshminarayana, G., Todalbagi, Rajendra & Dhurkari, Ram Kumar [Editors] (2017). National Conference on Operations Management, Analytics & Statistical Methods Proceedings. Mysore, SDMIMD. [ISBN: 978-93-83302-20-8].
  2. Jagadeesh, R. (2016) [Editor]. The TQM Journal. Emerald Group Publishing, ISSN: 1754-2731.
  3. Jagadeesh, R. (2016) [Editor]. Journal of Management Development. Emerald Group Publishing, ISSN: 0262-1711.
  4. Jagadeesh, R., Todalbagi, Rajendra & Srilakshminarayana, G. [Editors] (2016). International Conference on Operations Management and Research (ICOMAR 2016)  Proceedings. Mysore, SDMIMD. [ISBN: 978-93-83302-11-6].
  5. Parasuraman N. R., Venkatraja B., Jagadeesh R. and Sriram, M. (2015) (Editors). Special issue of Select papers of International Conference on Global Economic Growth and Sustainability, Annamalai International Journal of Business Studies and Research. November, Vol 7, Issue 2. ISSN (print): 0975-749X.
  6. Jagadeesh, R. [Editor] (2014). National Conference on Strategies, Innovations, and Paradigm Shifts in Logistics and Supply Chain Management Proceedings. Mysore, SDMIMD. [ISBN : 978-93-83302-04-8]
  7. Jagadeesh, R. [Editor] (2014). SDMIMD Journal of Management. Vol. 5(1), September. ISSN 0976-0652 [Print]; 2320-7906 [Online]. 

Book Publication

  1. Heizer, Jay, Render, Barry and Jagadeesh, R (2009). Operations Management (Indian Subcontinent Adaptation). 9th ed. New Delhi: Pearson.
  2. Jagadeesh, R. (Contributing Author). (2008). Supply chain management: an Indian perspective. New Delhi: Indian Institute of Materials Management (Mumbai) and Sagar Books.
  3. Jagadeesh, R. (Contributing Author). (2008). Recent trends in technical education. New Delhi: Macmillan Publishers (India).
  4. Jagadeesh, R. (Contributing Author). (2000). Managing in the era of change: challenges and perspectives. New Delhi: Excel Books.

Book Chapters

  1. Jagadeesh, R. (2019). Selection and ranking of six sigma projects – a comparative assessment of methods. Contemporary research in management – Vol. VIII by Mousumi Sengupta and Nilanjan Sengupta [compilers]. Mysore: Shri Dharmasthala Manjunatheshwara Institute for Management Development (SDMIMD).  [ISBN: 978-93-83302-23-76].
  2. Jagadeesh R. (2018). “Quality and innovation” or “Guts and glory” – the success story of micromax. Cases in Management – Vol. VII by N.R. Parasuraman, Mousumi Sengupta and Nilanjan Sengupta and G.Srilakshminarayana. [Editors]. Mysore: Shri Dharmasthala Manjunatheshwara Institute for Management Development (SDMIMD).  [ISBN: 978-93-83302-36-9].
  3. Jagadeesh R. (2017). A cold call on cold chains in India. Cases in Management – Vol. VI by N.R. Parasuraman, Mousumi Sengupta and Nilanjan Sengupta and G.Srilakshminarayana. [Editors]. Mysore: Shri Dharmasthala Manjunatheshwara Institute for Management Development (SDMIMD).  [ISBN: 978-93-83302-29-1].
  4. Jagadeesh, R. (2018). Demand forecasting and analysis in a declining market with emphasis on strategic operations management. Contemporary Research in Management – Vol. VII by Mousumi Sengupta and Nilanjan Sengupta [Compilers]. Mysore: Shri Dharmasthala Manjunatheshwara Research Centre for Management Studies (SDM RCMS), SDMIMD.  [ISBN: 978-93-83302-30-7].
  5. Jagadeesh, R. (2017). Performance benchmarking of electricity power stations using Data Envelopment Analysis. Contemporary Research in Management – Vol. VI by Mousumi Sengupta and Nilanjan Sengupta [Compilers]. Mysore: Shri Dharmasthala Manjunatheshwara Institute for Management Development (SDMIMD).  [ISBN: 978-93-83302-23-9].
  6. Jagadeesh, R. (2016). Airbags are not just a matter of air- Lessons from Takata and Toyota Recall. Cases in Management – Vol. V by N.R. Parasuraman, Mousumi Sengupta and Nilanjan Sengupta and G.Srilakshminarayana. [Editors]. Mysore: Shri Dharmasthala Manjunatheshwara Institute for Management Development (SDMIMD).  [ISBN:978-93-83302-14-7].
  7. Jagadeesh, R. (2016). Optimizing the Capacity Addition in a Component Manufacturing Industry- an Empirical Investigation. Contemporary Research in Management – Vol. V. by Mousumi Sengupta and Nilanjan Sengupta [Compilers]. Mysore: Shri Dharmasthala Manjunatheshwara Institute for Management Development (SDMIMD).  [ISBN: 978-93-83302-15-4].
  8. Jagadeesh, R. (2015). Application of 7 QC tools to investigate the rejection of lathe beds-case study of a machine tool manufacturing company. Cases in Management- Vol IV. N.R. Parasuraman, Mousumi Sengupta and Nilanjan Sengupta and G.Srilakshminarayana. [Editors]. Mysore: Shri Dharmasthala Manjunatheshwara Institute for Management Development (SDMIMD). [ISBN:978-93-83302-14-7]
  9. Jagadeesh, R. (2015). Enhancing the after-sales service quality using the Six-Sigma approach: a case study. Contemporary research in management – Vol. IV by Mousumi Sengupta and Nilanjan Sengupta [Compilers]. Mysore: SDM RCMS. [ISBN: 978-93-83302-08-6].
  10. Jagadeesh, R. (2014). Are Indian Car Buyers Not Serious About Safety? A Case Study of Maruti Suzuki India Limited. Cases in Management- Vol III. N.R. Parasuraman, Mousumi Sengupta, Nilanjan Sengupta and G.S. Lakshminarayana. [Editors]. Mysore: Shri Dharmasthala Manjunatheshwara Research Centre for Management Studies (SDM RCMS), SDMIMD. [ISBN:978-93-83302-05-5].
  11. Jagadeesh, R. (2014). Process Capability Assessment When Multiple Characteristics Exist : A Composite Approach Using Six Sigma Metrics. Contemporary research in management - Vol III by Mousumi Sengupta and Nilanjan Sengupta [Compilers]. Mysore: Shri Dharmasthala Manjunatheshwara Research Centre for Management Studies (SDM RCMS), SDMIMD. [ISBN:978-81-922146-8-9].
  12. Jagadeesh, R. (2013). How to improve the Supply Chain Management Competency to meet the Global Challenges. Contemporary research in management - Vol II by Mousumi Sengupta and Nilanjan Sengupta [Compilers]. Mysore: Shri Dharmasthala Manjunatheshwara Research Centre for Management Studies (SDM RCMS), SDMIMD. [ISBN: 978-81-922146-5-8].
  13. Jagadeesh, R. (2012). Quality strategy formulation and development using organizational perspective. Contemporary research in management - Vol I by Mousumi Sengupta and Nilanjan Sengupta [Editors]. Mysore: SDM Institute for Management Development, 2012. 33-48p. [ISBN:978-81-922146-1-0]

International Journals

  1. Jagadeesh R. (2016). Six sigma benchmarking of process capability analysis and mapping of process parameters. Journal of Operations and Supply Chain Management, Vol. 9 (2), pp 60 -71.
  2. Jagadeesh, R. (2015). Internalizing the Corporate Social Responsibility through strategic operations management. Arabian Journal of Business and Management Review, 5 (4), pp 1-5. doi: 10.4172/2223-5833.1000131, E-ISSN: 2223-5833
  3. Jagadeesh, R. (2015). Performance Assessment of Global Supply Chains and Moving Towards Optimization of Efforts and Challenges. International Journal of Recent Advances in Organizational Behavior and Decision Sciences, An Online International Research Journal, ISSN 2311-3197, pp 400-416.
  4. Jagadeesh, R. (2015). Responsible Operations through Materials Conservation – An Overview of Techniques and Trends. International Journal of Information, Business and Management, Vol 7 (2), (ISSN 2076-9202), p. 85-96.
  5. Jagadeesh, R. (2014). Training and Learning about Quality Management by 'Laqtaaq" – An Innovative Method. International Journal of Research in Organizational Behavior and Human Resource Management, Vol. 2, No. 4, 2014 (ISSN 2320-8724), p. 270-286.
  6. Jagadeesh, R. (2014). Quality Leaders- Learning from the Deming Prize Winners in India. International Journal for Quality Research, Vol. 8(3). September 2014. [ISSN: 1800-6450].
  7. Jagadeesh Rajashekharaiah (2014). Emphasis on Human Resource Management in Quality Improvement – A Case Study of Quality Awards’ Criteria. International Journal of Economics, Commerce and Management, Vol. II, Issue 1, 2014, ISSN 2348 0386 
  8. Jagadeesh Rajashekharaiah and Gershon, Mark. (2013). How many steps to quality? From Deming cycle to DMAIC, International Journal of Productivity and Quality Management, Volume 11, Issue 4, pp. 475-489
  9. Jagadeesh Rajashekharaiah and Gershon, Mark. (2011). Double LEAN Six Sigma – A Structure for Applying Lean Six Sigma, Journal of Applied Business and Economics, Volume 12, Issue 6, pp. 26 - 31
  10. Jagadeesh, R. and Gershon, Mark. (2010) Performance Assessment of Supply Chains – Comparison Across Countries: A Case Study of USA and India International Journal of Information Systems and Supply Chain Management, Volume 3, Issue 3, pp 66 - 79.
  11. Jagadeesh, R. and Subrahmanya Bhat, K.(2009)  An Empirical Study of Barriers to TQM implementation in Indian Industries, The TQM Journal, Volume 21,N0. 3, pp 261-273.
  12. Jagadeesh, R. (2006) Exploration into the Quality Septet, The TQM Magazine, Volume 18, Issue 5,  pp 433 – 439, September 2006
  13. Jagadeesh, R. and Dattakumar, R. (2003) Benchmarking – A Literature Review, International Journal of Benchmarking, Emerald (formerly MCB University Press), UK, No. 3, Vol. 10, 2003, pp 176 – 209
  14. Jagadeesh, R. (2000) Assuring Quality in Management Education - The Indian Context, Journal of Quality Assurance in Education, MCB University Press, UK, Vol.8, No.3, pp 110 - 119.
  15. Jagadeesh, R. (1999) Total Quality Management in India - Perspective  and Analysis, The TQM Magazine,  MCB University Press, UK, Vol. 11, No. 5,  September-October,  pp 321-327
  16. Jagadeesh, R. and Subash Babu. A.(1999) Process Capability Assessment of Correlated Data Using Time Series Analysis, International Journal of Management and Systems, Vol. 15, No. 2,  May - August,  pp 147-174
  17. Jagadeesh, R. and Subash Babu, A. (1994), Process Capability with Tool Wear: An Investigative Study, International Journal of Quality & Reliability, MCB University Press, UK, Vol.11, No.(2), pp 51‑62

National Journals

  1. Jagadeesh, R. (2012) CSR, Clean and Green Operations - Suppliers’ Code of Conduct Revisited. Journal of Supply Chain Management Systems 1(4), 30-36p.
  2. Jagadeesh, R. (2011) A Perspective on Retail Logistics: The Backbone of Retail Revolution in India. ITM n Ach – Propelled by “Self Actualization Needs” 5(2), 57-68p.
  3. Jagadeesh, R. (2009) SCM in Practice – A Case Study in the Food Retail Sector. Materials Management Review 6(2),18-20p.
  4. Jagadeesh, R. Impact of Product Recalls on Logistics. Materials Management Review 5(1), 2008. 38-40p.
  5. Jagadeesh, R. and Ramakrishna, H. (2008) Enhancing the Customers’ Service by Better Spares Management Using the Six Sigma Approach – A Case Study. Materials Management Review 4(10),10-13p.
  6. Jagadeesh, R. and Ramakrishna, H. (2008) Rejuvenate Six sigma and Lean: An Inquisitive Approach. PES Business Review 1(3).
  7. Jagadeesh, R. (2007) Benchmarking To Improve Supply Chain Performance. Materials Management Review, 2(4),8-13p.
  8. Jagadeesh, R., Subrahmanya Bhat, K. (2006) ISO 9000 Implementation in Indian Industries: A Study of its Reasons and Benefits. ICFAI Journal of Operations Management 5(4), November, 53-64p.
  9. Jagadeesh, R. (2006) Exploration into the Quality Septet. The TQM Magazine 18(5). 433–439p.
  10. Jagadeesh, R. (2006) Supply Chain Performance Measures – Trends and Issues. Materials Management Review 2(9), 18–20p.
  11. Jagadeesh, R. (2006) Developing Quality Strategy Using A Composite Approach. i-Manager's Journal of Management.
  12. Jagadeesh, R. Towards Improving Quality of Technical Education – Deming Wheel Revisited. Indian Journal of Technical Education, 24(4), October-December 14–17p.
  13. Jagadeesh, R. and Dattakumar, R. (2001) Strategic Application of Information Technology for Successful Benchmarking. Journal of Institute of Management Studies - 8M 6(4), 24-28p.
  14. Jagadeesh, R. (2000) Improvement of Quality of Higher Education in Engineering Sciences with Emphasis on International Aspects. Indian Journal of Technical Education 23(3), 43-47p.
  15. Jagadeesh, R. (2000) Assuring Quality in Management Education - The Indian Context. Journal of Quality Assurance in Education 8(3),110-119p.
  16. Jagadeesh, R. (2000) Balancing the Curriculum to Improve Quality. Indian Journal of Technical Education 23(2), 73-76p.
  17. Jagadeesh, R. (2000) Total Quality Management in India - Perspective and Analysis. The TQM Magazine 11(5), 321-327p.
  18. Jagadeesh, R. (1999) Corporate Success Through Strategic Application of Information Technology. Journal of Institute of Management Studies, 45-48p.
  19. Jagadeesh, R. (1999) Total Quality in Industry-Institute Partnership Through Deming's 14 Points. Indian Journal of Technical Education 22(2),15-18p.
  20. Jagadeesh, R. (1999) Effect of ISO 9000 Standards on Production/Operations Management. Quality Focus 4(1),1-4p.
  21. Jagadeesh, R. Fresh Engineering Graduates - Bridging the Gap Between Employers' Expectations and Reality. Journal of Engineering Education 12(3), January 1999.
  22. Jagadeesh, R. And Shankar Prasad, K. (1999) Inventory Control of Custom Made Products: A Case Study. Industrial Engineering Journal 25(5),19-25p.
  23. Jagadeesh, R. (1998) Total Quality Management Through Performance Appraisal. Journal of Institute of Management Studies - 8M,19-22p.
  24. Jagadeesh, R. (1998) Performance Appraisal and Total Quality Management. Indian Journal of Training and Development 8(1). 39-47p.
  25. Jagadeesh, R. and Chigateri, A.V. (1997) Development of Computerised Maintenance Manual for a Steel Plant - A Case Study. Journal of Maintenance, 13-17p.
  26. Jagadeesh, R. (1997) A Model Curriculum in Quality Engineering and Management Using Industry Institute Partnership. Indian Journal of Technical Education, 20(4),12-15p.
  27. Jagadeesh, R. (1995) Engineering Educator as Researcher - Some Issues. Indian Journal of Technical Education 18(2), 53-54p.

International Conference

  1. Jagadeesh, R. (2015). Performance Assessment and Optimization of Global Supply Chains. International Conference on Global Business, Economics, Finance and Social Sciences, SDMIMD and J A Alpha, Thailand , February 20-22. [ISBN: 978-1-941505-22-9]
  2. Jagadeesh, R. (2014) American University in the Emirates. International Conference on Technology and Business Management (ICTBM 2014), Dubai. Benchmarking India’s innovation capabilities using the Global Innovation Index.
  3. Jagadeesh, R. and Ramakrishna, (2007) H. Indian Institute of Science. Proceeding of the International Conference on Total Engineering, Analysis & Manufacturing Technologies (TEAMTECH-2007), Bangalore, India, October 4-6, 2007. Six Sigma Quality Strategies for Elimination of Repetitive Snags in the Manufacture of Dumpers.
  4. Jagadeesh, R. (2007) International Conference on Global Business Strategy in Competitive Environment, Chennai, India. Overcoming the Barriers in implementing TQM and sustaining the success through Continuous Quality Improvement - Deming’s 14 Points Revisited.
  5. Jagadeesh, R. and Ramakrishna, (2007) H. Proceedings of the Global Conference on Production and Industrial Engineering, Jalandhar, India. Comparison Of Traditional Quality Management Systems With Six Sigma.
  6. Jagadeesh, R. (2007) International Conference on Emerging Competitiveness Paradigms, Goa, India. Competitiveness Through Knowledge Based Entrepreneurship - Role of Institutions of Higher Learning.
  7. Jagadeesh, R. and Dattakumar, R. (2002) Proceedings of the International Conference on Quality, Reliability and Information Technology, New Delhi, Benchmarking Management Education – The Indian Context.
  8. Jagadeesh, R. (1997) International Conference on Quality Engineering & Management, Coimbatore, India. Achieving Quality Education Through Benchmarking.
  9. Jagadeesh, R. and Subash Babu, A. (1997) International Conference on Quality Engineering & Management, Coimbatore, India. An Integrated Approach to Tolerance Analysis Through Process Capability Studies.
  10. Jagadeesh, R. and Subash Babu, A. (1995) Proceedings of International Conference on Excellence in Manufacturing, Bangalore, India. 164-174p. Process Capability Measure for Multicharacteristic Situations.
  11. Jagadeesh, R. and Subash Babu, A. (1993) Proceedings of the International Symposium on Robotics, Mechatronics, and Manufacturing Systems, Kobe, Japan. A New Approach to Process Diagnostics and Management in Manufacturing Systems.

National Conference / Seminar

  1. Jagadeesh R. (2018). A Model Curriculum in Operations Management Using a Blended Pedagogy. National Conference on Future of Learning, IIMx Bangalore and IITBx Mumbai, Italy, IIMB January 15-16, 2018; 16 p.
  2. Jagadeesh, R. Mallamma Marimallappa (2009) Arts and Commerce College. National Seminar on Retail Revolution, Mysore. Retail Logistics - the backbone of retail revolution.
  3. Jagadeesh, R. (2009) SDM Institute for Management Development (SDMIMD) and Servion Global Solutions. Conference on Service Strategies for Global Leadership, Mysore. Enhancing Service Quality Through Lean Six Sigma - Modeling and Applications.
  4. Jagadeesh, R. Proceedings of the ISTE Annual Convention, Bhuvaneshwar, India, December 2008. Curriculum Design and Pedagogy in Technical Education to Satisfy the Customers’ Needs”, “Recent Trends in Technical Education”.
  5. Jagadeesh, R. and Ramakrishna, H. (2008) Kalasalingam University. All India National Conference on Changing Role Of Service Sector – Global Perspective (NCOSS'08), Tamilnadu. Applying Six Sigma in the Service Industry: A Review and a Case Study.
  6. Jagadeesh, R. and Ramakrishna, H. (2007) Manipal Institute of Technology. International Conference on Advances in Manufacturing Engineering (ICAME-2007), Manipal, India. Six Sigma Analysis of Group Attrition in Software Company - A Case Study.
  7. Jagadeesh, R. and Ramakrishna, H. NMAMIT. (2006) Proceedings of the National Conference on Advances in Mechanical Engineering (TQM-2006), Nitte. Six Sigma in Education - An Explanatory Study.
  8. Jagadeesh, R. and Ramakrishna, H. Jamia Milia Islamia, (2006) (University College). Proceedings of the National Conference on Advances in Mechanical Engineering, New Delhi. Six Sigma in Manufacturing and Non-Manufacturing Process.
  9. Jagadeesh, R. and Ramakrishna, (2005) H. P. A. College of Engineering. Proceedings of National Conference on Recent Advances in Mechanical Engineering, Mangalore. Key Factors for the successful implementation of Six Sigma Projects in Organisations.
  10. Jagadeesh, R. and Ramakrishna, (2005) H. National Conference on Advances in Mechanical Engineering, Hyderabad, 25–28p. Six Sigma Quality Strategy- An Overview.
  11. Jagadeesh, R. NMAMIT. (2004) Proceedings of National Conference on Integration of Strategies For Effective Quality Management In Technical Education, Nitte, India, 129-134p. Benchmarking in higher education - an overview.
  12. Jagadeesh, R., Subrahmanya Bhat, K., and Srinivasa Pai, (2004) P. Proceedings of National Conference on Challenges in Achieving Global Quality, Madurai, India, 121–126p. From ISO 9000 to TQM – A Journey Towards Excellence.
  13. Jagadeesh, R. and Dattakumar, R. (2004) Proceedings of National Conference on Challenges in Achieving Global Quality, Madurai, India, 195–201p. Application of Benchmarking In Manufacturing Sector.
  14. Jagadeesh, R., Subrahmanya Bhat, K., and Srinivasa Pai, (2004) P. Proceedings of National Conference on Advances in Mechanical Engineering, Shimoga, India, 11–20p. TQM Implementation Approaches in Industries – Some Issues.
  15. Jagadeesh, R. and Dattakumar, R. (2003) Proceedings of National Conference on Quality Management, Coimbatore. Benchmarking Engineering Education System Using Quality Award Criteria.
  16. Jagadeesh, R. (2003) Proceedings of National Conference on Quality Management, Coimbatore. What to Teach Under TQM?
  17. Jagadeesh, R. and Dattakumar, R. (2002) Proceedings of National Seminar on Role of Technical Education in Meeting Challenges of Globalization, Davanagere, India, 116-123p. Benchmarking Quality Initiatives in Engineering Colleges.
  18. Jagadeesh, R. (2002) Proceedings of National Seminar on Role of Technical Education in Meeting Challenges of Globalization, Davanagere, India, 19-26p. Meeting the Challenges of Globalization Through Continuous Quality Improvement of Technical Education.
  19. Jagadeesh, R. NMAMIT. (2002) Proceedings of the National Conference on Recent Trends in Condition Monitoring of Machines, NMAM Institute of Technology, Nitte, India. A Perspective on Reliability, Availability, and Maintainability, (RAM).
  20. Jagadeesh, R. (2002) Proceedings of National Conference on Advanced Trends in Mechanical Engineering Research and Development, Anantapur, Andhra Pradesh, India, 102-106p. Online Control Approach to Six Sigma Quality – An Empirical Investigation.
  21. Jagadeesh, R. and Dattakumar, R. (2000) National conference on Quality and Reliability Management, Vaniyambadi, Tamil Nadu. Benchmarking for Quality Improvement in IT and Non-IT Companies - A Comparative Study.
  22. Jagadeesh, R. (2000) Proceedings of AICTE Short Term Course on Maintenance of Machinery, Mysore, India. Maintenance Management Information Systems.
  23. Jagadeesh, R. (2000) Proceedings of AICTE Short Term Course on Maintenance of Machinery, Mysore, India. From Total Quality Management to Total Productive Maintenance.
  24. Jagadeesh, R. (2000) Proceedings of III Annual 8M Management Paper Contest, New Delhi, India. A Framework for Deploying Information Technology to Manage The Challenges of Change.
  25. Jagadeesh, R. and Dattakumar. R. (1999) Proceedings of the National Conference on Industrial Engineering, Tirupati, India. Quality Assurance Through Benchmarking: Identifying What to Benchmark.
  26. Jagadeesh, and R. Dattakumar. R. (1997) Proceedings of National Conference on Quality & Reliability, Mysore, India. Role of Benchmarking in TQM.
  27. Jagadeesh. R. (1997) Proceedings of National Conference on Quality & Reliability, Mysore, India. A Simulation Based Approach to Process Capability Studies.
  28. Jagadeesh. R. (1997) Proceedings of National Conference on Quality & Reliability, Mysore, India. Process Capability Analysis in the Presence of Non normality.
  29. Jagadeesh, R. (1995) Proceedings of All India Seminar on Advances in Industrial Engineering & Productivity Improvement Techniques, Allahabad, India. Quality Management in Service Industries.
  30. Jagadeesh, R. (1995) Proceedings of the National Conference on Role of Continuing Engineering Education in Industrial Restructuring, Roorkee, India. Need Based Training Material for Continuing Engineering Education - a Case Study in SPC.
  31. Jagadeesh, R. (1993) Proceedings of the 35th Annual Convention of Indian Institution of Industrial Engineering, Hyderabad, India, 258-264p. Total Quality Management in Engineering Education.
  32. Jagadeesh, R. and Subash Babu, A. (1993) Proceedings of the 8th ISME Conference on Mechanical Engineering, New Delhi. Some New Directions in Process Capability Studies.
  33. Jagadeesh, R. and Subash Babu, A. (1993) Presented in the 15th AIMTDR Conference, Coimbatore, India. A New System for Process Evaluation and Control Using Multiple Measures: An Approach to TQM.
  34. Jagadeesh, R. and Subash Babu, A. (1991) Presented in the 24th ORSI Conference, Bangalore, India and also abstracted in OPSEARCH, March April 1992. Process Control Using Multiple Measures - a Simulation Approach.
  35. Jagadeesh, R. and Subash Babu, A. (1991) Proceedings of the 7th National Convention of Production Engineers, Hyderabad, India, 4.8.1- 4.8.9p. The Effectiveness of Various Process Capability Measures - An Analysis Through Case Study.

Case Study

  1. Jagadeesh R. (2019). Empowering women’s safety through technological embellishment: Titan’s smart watches in India. Value Creation 4.0 - Marketing Products in the 21st Century by Gábor Rekettye, Transnational Press London, ISBN: 191299724X, 9781912997244.
Opinion Article
 
  1. Jagadeesh, R. (2017). Spiritual Obsession and its Influence on Behavioral Aspects of Students. Global Journal of Addiction & Rehabilitation Medicine, ISSN: 2573-2447; Volume: 02, Issue:12, December 2017, DOI: 10.19080/GJARM.2017.04.555648.